Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Boating > Marine Electronics

Marine Electronics Knowing where our dive spots are located and what is the depth for our dives make our marine electronics very important.

Reply
 
Thread Tools Rating: Thread Rating: 3 votes, 5.00 average. Display Modes
Old 07-29-2013, 09:14 PM   #1
masonlvvy
Registered User
 
Join Date: Jul 2013
Posts: 1
LED bulbs for marine nav lights

hi,guys,I am looking at some led bulbs that have a 20 watt equivalent incandescent rating. They look like this photo and have their LED in a perfect sideways pattern for sending light out. Some one on another forum said it was wrong, illegal, immoral, etc... to put an LED bulb in a light fixture intended for navigation. Said you MUST buy new LED nav light fixtures.
Personally as long as the light can still put out at least as much as the original #90 incandescent bulb did, then I am perfectly happy with it.
I went from OEM #90 weaker output, to 1142 (18 watts), and now going to LED (20 watts output).
thanks
masonlvvy is offline   Reply With Quote
Old 07-29-2013, 10:10 PM   #2
freedivemd
Registered User
 
Join Date: Jul 2013
Location: Annapolis, Maryland
Posts: 107
Re: LED bulbs for marine nav lights

Without details I don't know exactly what you are doing - putting an LED bulb in an old 12V incandescent socket? LED bulbs come in a variety configurations - some can be connected directly to 12 Volts because they have built in "driver" circuits. Others don't have built in drivers and are just bare LEDS and if you put 12 volts across them they may just blow out instantly.
freedivemd is offline   Reply With Quote
Old 07-29-2013, 10:53 PM   #3
SEATUX
Registered User
 
SEATUX's Avatar
 
Join Date: Apr 2005
Location: Port Charlotte Fl
Age: 77
Posts: 2,499
Re: LED bulbs for marine nav lights

Quote:
Originally Posted by freedivemd View Post
Without details I don't know exactly what you are doing - putting an LED bulb in an old 12V incandescent socket? LED bulbs come in a variety configurations - some can be connected directly to 12 Volts because they have built in "driver" circuits. Others don't have built in drivers and are just bare LEDS and if you put 12 volts across them they may just blow out instantly.
Please explain what your saying.

LED's are Light Emitting Diodes, they operate on DC, the question is two fold, what voltage DC are they rated for, and polarity, you should not reverse connect them.

What "driver" are you talking about? Perhaps you are confusing LED's modified to operate on AC ?
SEATUX is online now   Reply With Quote
Old 07-30-2013, 11:36 AM   #4
freedivemd
Registered User
 
Join Date: Jul 2013
Location: Annapolis, Maryland
Posts: 107
Re: LED bulbs for marine nav lights

Not talking about AC. Talking about 12 volt DC boat systems - that is what you want, correct? LEDs are more complicated than incandescent bulbs. The voltage across an LED is typically around 2 volts - but the real parameter to measure for LEDs is the current. If you regulate the current to a proper level then the voltage will be around 2 volts by default. If you provide too much current (by providing too high a voltage - ohms law ---> V=IR) they will just blow out.
Thus, you need a driver circuit to regulate the current. The driver takes the raw power (typically 12 volts on a boat) and conditions and regulates it to the proper current and voltage. Some LED bulbs come with a driver, you just have to be sure it says on the package that you can plug it into a 12 volt socket. Other LEDS are just the plain LED by itself and you can't plug it into 12 volts.
Also, a reverse polarity on an LED of 12 volts will probably damage it - unless it has a well designed driver that will protect it - in which case it simply won't light up.
freedivemd is offline   Reply With Quote
Old 07-30-2013, 03:08 PM   #5
freedivemd
Registered User
 
Join Date: Jul 2013
Location: Annapolis, Maryland
Posts: 107
Re: LED bulbs for marine nav lights

I just googled "LED replacement bulb for nav light"

got a of of options there - seems the industry has plenty of LEDs that are compatable with older fixtures.
freedivemd is offline   Reply With Quote
Old 08-03-2013, 10:34 PM   #6
gcracker89
Registered User
 
gcracker89's Avatar
 
Join Date: Jul 2006
Location: Port Richey, Fl.
Age: 70
Posts: 1,415
Re: LED bulbs for marine nav lights

The original problem was the load draw was so low they would not "burn thru" surface oxidation on the fixtures contacts. Ie your bulb is out you rap the light and it comes on
__________________
THE MAIN REASON THAT SANTA IS SO JOLLY IS BECAUSE HE KNOWS WHERE
ALL THE BAD GIRLS LIVE.
gcracker89 is offline   Reply With Quote
Old 10-08-2013, 10:50 AM   #7
starbright55
Registered User
 
Join Date: Dec 2011
Location: San Diego
Posts: 179
Re: LED bulbs for marine nav lights

Also, a white 12v LED cannot be substituted for a bow nav light that uses a single bulb with a red/green cover. I can't remember which, but one of the two colors will not show correctly behind the colored lens.

I left my bow light incandescent and just made my stern/anchor light LED (since I leave that one on more often).
starbright55 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:28 PM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com