Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Spearfishing Gear > All About Guns

All About Guns What's your weapon of choice, and why? Discuss the beloved speargun here!

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-30-2020, 12:11 PM   #16
musubi
Registered User
 
Join Date: Jan 2017
Location: Big Island
Posts: 220
Re: Current best shafts on the market

Quote:
Originally Posted by Murdoch View Post
Hi Musubi,
That's them. Not sure how I missed that in your comment. Sorry.
Yes in Aus, but they did exactly what I was chasing without fuss and the cost per spear (bought 8 of them) was worth it.
Cheers,
Murdoch
I agree, the cost from them (Dean) was worth it. His shafts are also very straight. I tend to spin all my shafts on arrow spinners to test them.
musubi is offline   Reply With Quote
Old 11-10-2020, 07:23 PM   #17
memosub
Registered User
 
memosub's Avatar
 
Join Date: Jun 2005
Location: Santa Marta Colombia
Age: 68
Posts: 204
Re: Current best shafts on the market

The best carbon shaft I know are the Rob allen and Rabitech, but the best inox shaft are without doubt The Addiction Spears, UTH by Dean Koutras!!!!and they are custom made to fits the client needs!!
memosub is offline   Reply With Quote
Old 07-25-2021, 09:45 PM   #18
makoa352
HUI KOA KAI O HAMAKUA
 
makoa352's Avatar
 
Join Date: Aug 2009
Location: HAMAKUA-SOUTHPAC
Posts: 192
Re: Current best shafts on the market

Mannysub shafts made by Hunt! Hands down the best…especially for rollers.
__________________
HUI KOA KAI O HAMAKUA

E MALAMA I KE KAI
makoa352 is offline   Reply With Quote
Old 08-04-2021, 10:11 PM   #19
Pankrationist
Registered User
 
Pankrationist's Avatar
 
Join Date: Jul 2011
Posts: 647
Re: Current best shafts on the market

Quote:
Originally Posted by Marco View Post
When you combine two different metals in a conductive media (sea water), you'll have electrolytic corrosion. I won't do that.
Spring steel shafts typically have a stainless flopper and pin. The protective coating will have long gone on the shaft from normal use before a stainless nose cone will have caused a problematic event.

I do like your tradesmen thought process though. Legend.
Pankrationist is offline   Reply With Quote
Old 08-06-2021, 08:44 AM   #20
baitball
Registered User
 
Join Date: Feb 2017
Location: Hollywood, FL
Posts: 96
Re: Current best shafts on the market

Sigalsub shafts are great. Diveinn or scubastore.com has them for a good price. they sell the nose cones too.
baitball is offline   Reply With Quote
Old 10-06-2023, 08:37 PM   #21
Murdoch
Registered User
 
Join Date: Apr 2012
Posts: 10
Re: Current best shafts on the market

Sorry to re-open this old thread.
Does anyone know if Dean Koutras from Addiction Spears is still making custom shafts? Can't find anything online, and sent a Facebook message, but not sure if he's still active.
Cheers in advance.
Murdoch.
Murdoch is offline   Reply With Quote
Old 10-07-2023, 12:21 AM   #22
Marco
Registered User
 
Marco's Avatar
 
Join Date: Jan 2007
Location: North Miami, Florida
Age: 59
Posts: 2,870
Re: Current best shafts on the market

https://instagram.com/deankoutras?ig...IwNzIyMDk2Mg==
__________________
Marco

A bad day fishing is ALWAYS better than a good day at work
Marco is offline   Reply With Quote
Old 10-22-2023, 12:56 AM   #23
Murdoch
Registered User
 
Join Date: Apr 2012
Posts: 10
Re: Current best shafts on the market

Thanks Marco,
Got onto him straight away through link and he's already shipped some fresh spears my way.
Legend.
Murdoch is offline   Reply With Quote
Old 10-22-2023, 06:50 AM   #24
Marco
Registered User
 
Marco's Avatar
 
Join Date: Jan 2007
Location: North Miami, Florida
Age: 59
Posts: 2,870
Re: Current best shafts on the market

You're welcome!
__________________
Marco

A bad day fishing is ALWAYS better than a good day at work
Marco is offline   Reply With Quote
Old 11-04-2023, 07:17 PM   #25
memosub
Registered User
 
memosub's Avatar
 
Join Date: Jun 2005
Location: Santa Marta Colombia
Age: 68
Posts: 204
Re: Current best shafts on the market

Dean Koutras from Addiction spears, the best shafts money can buy!!!!
memosub is offline   Reply With Quote
Old 11-28-2023, 11:17 AM   #26
Mikel_24
Registered User
 
Join Date: Nov 2016
Location: Bilbao (Spain)
Posts: 445
Re: Current best shafts on the market

Quote:
Originally Posted by popgun pete View Post
For those prices... they better be good! I guess I will stick to Meandros, Devoto, Sigalsub, Picasso and Pathos for now... I could get two (and almost three) shafts for the price of one of those.

Mikel
Mikel_24 is offline   Reply With Quote
Old 05-14-2024, 10:58 PM   #27
Rob Ryan
Registered User
 
Rob Ryan's Avatar
 
Join Date: Feb 2014
Posts: 102
Re: Current best shafts on the market

I'm really surprised that nobody had mentioned M85, formerly Speargods. I got a slew of break down shafts from them and theyre pretty sweet!
Rob Ryan is offline   Reply With Quote
Old 05-15-2024, 12:25 PM   #28
RichT
Senior Member
 
RichT's Avatar
 
Join Date: Apr 2003
Location: St. Petersburg, FL
Posts: 3,106
Re: Current best shafts on the market

Spring steel: These shafts are typically made in South Africa or Asia where environmental laws are lax. The rustproof coating used to cover these shafts is banned in most 1st world countries (in its liquid form) due to its toxic nature, but the shafts are legal to import once the coating is dry. These shafts are typically harder than stainless steel shafts by approximately 5-10 rockwell points. They rust very quickly if not maintained well and the floppers fail to deploy when they rust. They are generally not the straightest. Rob Allen leads the pack...

Stainless steel- Most spearfishing shaft manufacturers use 17-4 (Inox) type stainless steel since it is one of the few steels that can be hardened through a special heat treatment process.
It's a fact that most manufacturers don't get this process correct each and every time which results in shafts that are too soft (bend easily) or too brittle (they snap). Heat treating shafts properly is a VERY precise series of steps that must be strictly followed in order to get that magic Rockwell 44 hardness that is the sweet spot for spearfishing shafts. Further... many don't quench their shafts properly because they use chest style ovens or commercial ovens for their heat treatment.

As far as the quality of steel? All 17-4 Stainless is NOT created equal! Far from it! Many manufacturers use steel that contains impurities that result in shafts that bend/break easily or they are far from straight.
The only type of 17-4 that should be used for spearshafts is Certified, high quality, Centerless-ground 17-4 stainless steel.

Centerless grinding is a process that starts with a larger diameter rod that is ground down to the needed diameter. The result is a rod that is MUCH straighter than a normal rod and the surface stresses are removed.
This results in a shaft that shoots straighter and doesn't get the mini/micro bends/twists that come from hitting rocks/wrecks. In other words, it stays accurate longer until you get a major bend. So why doesn't everybody use centerless ground steel??
Because it's much more expensive.

The last major thing with shafts that varies considerably is how well sharkfins are welded on and if they are straightened properly after welding. Shark fins that have been spot welded WILL eventually break off. Saltwater gets trapped under the sharkfin unless completely encircled by the weld.
In addition, ALL stainless-steel warps after sharkfins are welded on. The best manufacturers straighten their shafts perfectly after this occurs while some manufacturers do it to varying degrees or not at all. The result of not fixing this warpage is shafts that shoot high on long shots or they are generally not quite as accurate.

IMO... The best shafts in the U.S.A are made by M85 Manufacturing (Formerly Spearcrafters) Distributed by Red Tide Spearfishing, Spear Gods and others. Addiction made really good shafts but I don't think Dean is making them anymore.
The Best shafts from Europe right now are probably Hunt although I've seen big differences in their quality over the years. There are a lot of shitshafts coming out of Europe right now so buyer beware.

Bottom line... Any shaft will kill a fish from 3 feet away. The best shafts are accurate at longer distances, and they stay accurate longer.
There is a good reason why some shafts are more expensive than others.
RichT is offline   Reply With Quote
Old 05-22-2024, 06:55 PM   #29
memosub
Registered User
 
memosub's Avatar
 
Join Date: Jun 2005
Location: Santa Marta Colombia
Age: 68
Posts: 204
Re: Current best shafts on the market

Quote:
Originally Posted by Murdoch View Post
Hi,

Sorry to tag a further question onto your original.
2 years ago I had some custom spears made in the US.
Stainless, diameter, length, flopper placement, shark fins etc... all to order.
Arrived in great shape, all still in great shape and I can't speak highly enough of them.
Unfortunately I've lost all the original paperwork and emails and can't recall their name.
They only did the square cut notch though, but as I was using these on neptonics mechs it was perfect.

I'm want to get in touch for some new guns, but can't find them.
If anyone can point me in the direction or recall the name (just throw them out there please), I'd be very appreciative.

Adrenaline spears, or something along those lines I think.

Daintreediver, if someone can jog my memory, then that'd be my input to your question But as you are using SA shafts I assume you are after the euro notch?

Cheers in advance
Murdoch

Hi, without dubt you are talking about Adiction Spears, Dean Koutras is a great skaft builder!!!
memosub is offline   Reply With Quote
Old 05-28-2024, 12:58 AM   #30
spearq8
Registered User
 
spearq8's Avatar
 
Join Date: May 2009
Posts: 3,296
Re: Current best shafts on the market

Quote:
Originally Posted by RichT View Post
Spring steel: These shafts are typically made in South Africa or Asia where environmental laws are lax. The rustproof coating used to cover these shafts is banned in most 1st world countries (in its liquid form) due to its toxic nature, but the shafts are legal to import once the coating is dry. These shafts are typically harder than stainless steel shafts by approximately 5-10 rockwell points. They rust very quickly if not maintained well and the floppers fail to deploy when they rust. They are generally not the straightest. Rob Allen leads the pack...

Stainless steel- Most spearfishing shaft manufacturers use 17-4 (Inox) type stainless steel since it is one of the few steels that can be hardened through a special heat treatment process.
It's a fact that most manufacturers don't get this process correct each and every time which results in shafts that are too soft (bend easily) or too brittle (they snap). Heat treating shafts properly is a VERY precise series of steps that must be strictly followed in order to get that magic Rockwell 44 hardness that is the sweet spot for spearfishing shafts. Further... many don't quench their shafts properly because they use chest style ovens or commercial ovens for their heat treatment.

As far as the quality of steel? All 17-4 Stainless is NOT created equal! Far from it! Many manufacturers use steel that contains impurities that result in shafts that bend/break easily or they are far from straight.
The only type of 17-4 that should be used for spearshafts is Certified, high quality, Centerless-ground 17-4 stainless steel.

Centerless grinding is a process that starts with a larger diameter rod that is ground down to the needed diameter. The result is a rod that is MUCH straighter than a normal rod and the surface stresses are removed.
This results in a shaft that shoots straighter and doesn't get the mini/micro bends/twists that come from hitting rocks/wrecks. In other words, it stays accurate longer until you get a major bend. So why doesn't everybody use centerless ground steel??
Because it's much more expensive.

The last major thing with shafts that varies considerably is how well sharkfins are welded on and if they are straightened properly after welding. Shark fins that have been spot welded WILL eventually break off. Saltwater gets trapped under the sharkfin unless completely encircled by the weld.
In addition, ALL stainless-steel warps after sharkfins are welded on. The best manufacturers straighten their shafts perfectly after this occurs while some manufacturers do it to varying degrees or not at all. The result of not fixing this warpage is shafts that shoot high on long shots or they are generally not quite as accurate.

IMO... The best shafts in the U.S.A are made by M85 Manufacturing (Formerly Spearcrafters) Distributed by Red Tide Spearfishing, Spear Gods and others. Addiction made really good shafts but I don't think Dean is making them anymore.
The Best shafts from Europe right now are probably Hunt although I've seen big differences in their quality over the years. There are a lot of shitshafts coming out of Europe right now so buyer beware.

Bottom line... Any shaft will kill a fish from 3 feet away. The best shafts are accurate at longer distances, and they stay accurate longer.
There is a good reason why some shafts are more expensive than others.

Excellent and very accurate information!
spearq8 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:16 AM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com