Travel tube gun idea for split spears

[popgun pete]

Usually travel spearguns have two piece spears that are of equal length, i.e. the shaft join is the center of the assembled spear, but that does not have to be the case. If the shaft can be made in unequal lengths then the bending at the join should be reduced. The shaft main body is sized to fit inside the barrel tube and the balance of shaft length, i.e. the tail, is taped to the main shaft for transport, all being packed inside the barrel tube. Rear handle and muzzle are removed and carried in your travel bag. If the spear tip unscrews then the spear can be resized to fit more shaft main body length in the barrel tube and hence the tail piece can be shortened.