Roller gun two stage help

[mattthemat]

I'm currently in the process of trying to convert my Pathos 75 to a roller and my end goal is to have a two stage roller for the added power
My gun is aluminum so I was thinking about the possibility of screwing in a sharkfin line anchor as a hook. Something like this: http://www.neptonicsystems.com/speargun-line-anchor.php
So I was wondering if anybody has done this before or if anybody has a better idea

[cancunspearo]

https://m.youtube.com/watch?v=Max-pRyDAp4

here you go my friend!

[mattthemat]

Thanks a lot!

[spearq8]

Ermes sub also has some accessories for roller and has the hook clamp.

http://www.ermes-sub.net/-componenti-roller.html

I am not so sure I would want to drill in a non foam filled tube though ... chances are it will eventually flood. I am thinking about the same exact problem and I think a better solution is to have the drill in an area outside the barrel "O" ring. Depending on the gun you have things could be different, but in my case I have a few cm of space after the "O" ring where the barrel connects to the muzzle.

[Cyprus_Spearo]

Do not drill in the tube. It will eventually fail and leak. All you need to do is screw a hook on the reel base and use a line as your stage. I posted this before right here. Extremely easy and effective.

[mattthemat]

Sounds good Petros. Do you sell the hooks or know of how to get them?
And how would you rig and wrap the mono with the rubbers on the bottom?

[Cyprus_Spearo]

Email me at spearamerica@gmail.com to send you more pictures and yes i do have the hook. It is $5.

[Nwsportsman]

TinMan made a really nice compound roller gun from a modified Mako. Some real good ideas.

http://www.spearboard.com/showthread...ht=roller+mako