Quick release Gopro mask mount

[marginatus]

Let me know what you think about it...
Any feedback is welcome.
thanks

[AlexbeeintheUK]

Looks good! Perhaps where the base arm meets the underside of the quick release could be a little wider giving more strength.

What about the same kind of design except the main arm would have the actual GoPro connecting point - minimizing design & weight as you wouldnt then need to use a standard gopro quick release buckle or J hook to connect, if that makes sense?

Just my 2c

[marginatus]

Originally Posted by AlexbeeintheUK

Looks good! Perhaps where the base arm meets the underside of the quick release could be a little wider giving more strength.
Just my 2c

Ok, I'll look into it.

Originally Posted by AlexbeeintheUK

What about the same kind of design except the main arm would have the actual GoPro connecting point - minimizing design & weight as you wouldnt then need to use a standard gopro quick release buckle or J hook to connect, if that makes sense?
Just my 2c

That are parts, already available that do that... the point of this one is exactly to have it with the quick release so one can take the camera off quickly and film in a hole; pass the camera to a buddy to film you, move the camera from mask to gun; to pole; etc

thanks for your input

[AlexbeeintheUK]

Originally Posted by marginatus

That are parts, already available that do that... the point of this one is exactly to have it with the quick release so one can take the camera off quickly and film in a hole; pass the camera to a buddy to film you, move the camera from mask to gun; to pole; etc

thanks for your input

Ah ok, that makes sense and could definitely prove useful

[Cuda23]

I like it. If you want to sell one send me a PM.

[marginatus]

Originally Posted by Cuda23

I like it. If you want to sell one send me a PM.

thanks you for your interest...
I'll tweek the model and order a few to test...
I'll send you a PM about testing one....

[SpearS0CAL]

Let me know if you need more testers...

[Yodaa]

I volunteer also. Thanks

[SDDiver5]

x3

[marginatus]

Just to clarify, tester's will have to pay it's actual cost (lower then the price they will be then sold) and shipping.

There's enough volunteers for now and will be contacted by order
thanks

[marginatus]

Updated to take the nut on the outside and some minor improvements...
Going for printing on Monday...

[Cuda23]

Looks good.

[SpearS0CAL]

Very cool. Keep us posted when you have some to sell!

[marginatus]

Originally Posted by SpearS0CAL

Very cool. Keep us posted when you have some to sell!

Ok, might have a few very soon if these turn out perfect in the first try (gained some experience with the C4 mount ).

Please keep in mind that these assume that your mask has the frame separated from the skirt and allows a hole to be drilled in the frame to take a screw. Or it can be glued (like epoxy). I think everyone is aware of this as some might already have some kind of mount this way...

This mount has a 15mm (vertical) distance from the centre of the hole to the base of the mount and a 10mm (horizontal) distance from the back of the mount to the surface that gets in contact with the frame.

Would these dimensions be suitable for you? If not, which?

[Cuda23]

Originally Posted by marginatus

Ok, might have a few very soon if these turn out perfect in the first try (gained some experience with the C4 mount ).

Please keep in mind that these assume that your mask has the frame separated from the skirt and allows a hole to be drilled in the frame to take a screw. Or it can be glued (like epoxy). I think everyone is aware of this as some might already have some kind of mount this way...

This mount has a 15mm (vertical) distance from the centre of the hole to the base of the mount and a 10mm (horizontal) distance from the back of the mount to the surface that gets in contact with the frame.

Would these dimensions be suitable for you? If not, which?

What brand of mask are you making the prototype for? I have a Riffe Sight/AQA mask and those measurements sound perfect.