Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Spearfishing Gear > All Other Gear

All Other Gear Tanks, BCDs, Regs, Fins, Stringers, and all other gear we use in Spearfishing.

Reply
 
Thread Tools Rate Thread Display Modes
Old 06-13-2023, 08:50 AM   #1
JetBoy
Registered User
 
Join Date: Oct 2017
Posts: 256
Tried everything to re-glue foot pocket…

Read the threads, tried superglue and 5200 and nothing sticks. The fix seems ok, and then one day diving and the side rail of the foot pocket comes off the blade…again. I’m an inch away from duct taping the thing (black tape, of course…I don’t want to be a, “bubba.”) and forgetting about a more elegant solution. Unless some of you gurus can help?
JetBoy is offline   Reply With Quote
Old 06-13-2023, 03:31 PM   #2
popgun pete
Registered User
 
popgun pete's Avatar
 
Join Date: Mar 2006
Posts: 4,270
Re: Tried everything to re-glue foot pocket…

Superglue or cyanoacrylate does not work in water, so you need something like a contact adhesive. Epoxy glue can be used on rubber fins, but does not stick to any plastic material unless you rough it up. A polyurethane based adhesive may work, but I have not used it in such an application.
popgun pete is offline   Reply With Quote
Old 06-13-2023, 04:35 PM   #3
SEATUX
Registered User
 
SEATUX's Avatar
 
Join Date: Apr 2005
Location: Port Charlotte Fl
Age: 77
Posts: 2,499
Re: Tried everything to re-glue foot pocket…

I hate the stuff, but try Aqua Seal, Be SURE To use the cotel hardener ( not only does it cure faster, but it stays flexable)
SEATUX is offline   Reply With Quote
Old 06-14-2023, 01:06 PM   #4
JetBoy
Registered User
 
Join Date: Oct 2017
Posts: 256
Re: Tried everything to re-glue foot pocket…

Quote:
Originally Posted by SEATUX View Post
I hate the stuff, but try Aqua Seal, Be SURE To use the cotel hardener ( not only does it cure faster, but it stays flexable)
Thanks for this! I should’ve mentioned that these are carbon fins, which is likely complicating things further. I’ll get some Aqua Seal and give it a try.
JetBoy is offline   Reply With Quote
Old 06-15-2023, 12:07 AM   #5
divenfish
Registered User
 
divenfish's Avatar
 
Join Date: Sep 2009
Location: NorCal
Posts: 425
Re: Tried everything to re-glue foot pocket…

Why don't you contact the manufacturer see what they recommend
divenfish is offline   Reply With Quote
Old 06-27-2023, 04:39 PM   #6
Marco
Registered User
 
Marco's Avatar
 
Join Date: Jan 2007
Location: North Miami, Florida
Age: 59
Posts: 2,870
Re: Tried everything to re-glue foot pocket…

European manufacturers use cyanoacrilate (Super glue). The most important step when glueing is previous preparation; you must clean off any dirt, residue and grease very well. Sand both surfaces and then apply the glue. Once applied, put some pressure all over the footpocket tendoms with something like this:



And let it dry for 24 hours.
__________________
Marco

A bad day fishing is ALWAYS better than a good day at work
Marco is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:15 AM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com