|
|||||
| Home | Tournaments | Calendar | Weather | Merchandise | Sponsors |
|
|||||||
| Repairs to Engines and Boats BOAT means "Break Out Another Thousand" to many of us. Discuss your engine and hull repairs here. |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
04-15-2016, 01:15 PM
|
#1 |
|
Registered User
Join Date: Jun 2006
Location: Ft. Lauderdale
Posts: 444
|
Yamaha Help - Lost groung connection
I will admit. I did not search previous threads. I am at the marina and I need a little help.
200 HP 2000 yr SX200TXRY It started with my port outboard not running the fuel pump. I saw that voltage was there but no ground. I replaced fuel pump resistor. That did not fix it. I see that there apears to be not ground connection. Looking at console gauges - I see that the Port engine Batt Voltage and Tach are not working. I am trying to locate the ground point adn/or common failures ie connnectors that make be loose. Any thoughts?
__________________
If you're not the lead dog, the view never changes. * |
|
|
|
04-15-2016, 02:16 PM
|
#2 |
|
Naval gazer extraordinair
Join Date: Jan 2003
Posts: 42,214
|
Re: Yamaha Help - Lost groung connection
Uhm...check ground connection to the motor? Ohm the block to the negative battery terminal. Should be practically zero.
__________________
“If the natural tendencies of mankind are so bad that it is not safe to permit people to be free, how is it that the tendencies of these organizers are always good? Do not the legislators and their appointed agents also belong to the human race? Or do they believe that they themselves are made of a finer clay than the rest of mankind?” ― Frederic Bastiat, The Law |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
