View Single Post
Old 05-24-2023, 04:03 AM   #5
doyenofcastle
Registered User
 
Join Date: Mar 2015
Posts: 482
Re: Handle 3D module

Quote:
Originally Posted by spearq8 View Post
Yes of course you can increase and decrease the size of the model before printing. On my 3D printer for example, I always add 5% volume as for some reason it always prints 5% smaller. You could print a 10cm ruler at exact size and then check the real print size ... this might give you a better idea of how to calibrate your printer.

Having said all that, I haven't printed anything on my 3D printer in like 2 years. The quality of 3D prints you get from Sculpteo or other 3D print shops is dramatically better ... so I just use them. If you are using non metal 3D printing, it is also not expensive at all and the choice of materials is also much better. You can for example print an invert roller muzzle and use as is ... I wouldn't dare do that with a 3D printed muzzle on my machine unless I had it covered over with Carbon Fiber.
thanks I will check that ,hope it work
doyenofcastle is offline   Reply With Quote